How much door installation costs
Quick answer
Replacing a front door in the US usually costs $500 to $2,500 or more installed for a single door, and $1,500 to $6,500 or more for double doors, according to HomeGuide. Patio sliding doors typically run $1,500 to $6,000, French doors $2,000 to $7,500, and large multi-slide or bi-fold doors $5,000 to $22,000. An interior door costs about $120 to $570 installed.
| Job | US average (typical range) | Typical |
|---|---|---|
| Entry door, installed | $700–$3,500 | $1,600 |
| Double entry doors, installed | $1,500–$6,500 | $4,000 |
| Patio sliding door | $1,500–$6,000 | $3,000 |
| French doors | $2,000–$7,500 | $4,000 |
| Multi-slide or bi-fold door | $5,000–$22,000 | $10,000 |
| Garage door | $900–$4,000 | $1,800 |
| Storm door | $400–$1,100 | $750 |
| Interior door, installed | $120–$570 | $350 |
| New door frame | $130–$600 | $320 |
US national averages for 2026, labor and standard materials included, from published cost guides (sources at the end of this page). Local prices differ: see the city table below, or enter your ZIP code in the calculator.
Front door cost by material
| Door material | Door only, single | Good to know |
|---|---|---|
| Steel | $200 to $600 | Secure, durable and affordable; can rust if scratched |
| Fiberglass | $300 to $2,000 | Insulates well and resists dents; can look like wood |
| Solid wood | $500 to $2,500 | Classic look; needs refinishing and can swell in moisture |
| Iron | $1,700 to $3,000+ | Strong and decorative; expensive |
Labor for a basic front door replacement usually runs $230 to $800, and more for custom doors, new framing, sidelights or a transom. Sidelights add $400 to $2,000 or more, and a transom window $300 to $900.
Find a door installer near you
Enter your ZIP code to see local door prices and get matched with a vetted, licensed door installer for your area. GOLDGCP works in every US ZIP code, and our windows and doors showroom shows the doors we supply.
Entry door costs in 50 US metros
This table prices a standard entry door, installed, in each of the 50 largest US metros, using each metro's construction cost factor.
| Metro | Cost factor | Entry door, installed |
|---|---|---|
| New York | 1.31 | $915–$4,600 |
| San Francisco Bay Area | 1.28 | $895–$4,500 |
| San Jose | 1.28 | $895–$4,500 |
| Boston | 1.23 | $860–$4,300 |
| Chicago | 1.20 | $840–$4,200 |
| San Diego | 1.19 | $835–$4,150 |
| Sacramento | 1.17 | $820–$4,100 |
| Philadelphia | 1.15 | $805–$4,000 |
| Seattle | 1.15 | $805–$4,000 |
| Providence | 1.15 | $805–$4,000 |
| Los Angeles | 1.14 | $800–$4,000 |
| Detroit | 1.13 | $790–$3,950 |
| Riverside–San Bernardino | 1.11 | $775–$3,900 |
| Portland | 1.10 | $770–$3,850 |
| Las Vegas | 1.10 | $770–$3,850 |
| Milwaukee | 1.10 | $770–$3,850 |
| Hartford | 1.10 | $770–$3,850 |
| Minneapolis–St. Paul | 1.06 | $740–$3,700 |
| Pittsburgh | 1.06 | $740–$3,700 |
| Denver | 1.05 | $735–$3,700 |
| Washington DC | 1.04 | $730–$3,650 |
| St. Louis | 1.04 | $730–$3,650 |
| Cincinnati | 1.02 | $715–$3,550 |
| Salt Lake City | 0.99 | $695–$3,450 |
| Orlando | 0.98 | $685–$3,450 |
| Columbus | 0.98 | $685–$3,450 |
| Cleveland | 0.98 | $685–$3,450 |
| Baltimore | 0.96 | $670–$3,350 |
| Kansas City | 0.96 | $670–$3,350 |
| Jacksonville | 0.96 | $670–$3,350 |
| Virginia Beach–Norfolk | 0.94 | $660–$3,300 |
| Miami | 0.93 | $650–$3,250 |
| Tampa | 0.93 | $650–$3,250 |
| Indianapolis | 0.93 | $650–$3,250 |
| Phoenix | 0.90 | $630–$3,150 |
| Rochester | 0.90 | $630–$3,150 |
| Oklahoma City | 0.89 | $625–$3,100 |
| Buffalo | 0.89 | $625–$3,100 |
| Nashville | 0.87 | $610–$3,050 |
| Memphis | 0.87 | $610–$3,050 |
| Richmond | 0.87 | $610–$3,050 |
| Louisville | 0.86 | $600–$3,000 |
| Birmingham | 0.86 | $600–$3,000 |
| Atlanta | 0.85 | $595–$3,000 |
| Charlotte | 0.85 | $595–$3,000 |
| Raleigh–Durham | 0.85 | $595–$3,000 |
| Dallas–Fort Worth | 0.84 | $590–$2,950 |
| Houston | 0.82 | $575–$2,850 |
| Austin | 0.82 | $575–$2,850 |
| San Antonio | 0.80 | $560–$2,800 |
Cost factors from the U.S. Army Corps of Engineers Area Cost Factors (US average = 1.00). Outside these metros, the calculator uses your state's price level from the Bureau of Economic Analysis. Linked metros have a full local guide.
Door types and what they cost
| Door | Typical installed cost |
|---|---|
| Interior door, pre-hung | $120 to $570 |
| Storm door | $400 to $1,100 |
| Fire-rated door | $450 to $1,100 |
| Single entry door | $500 to $2,500+ |
| Double entry doors | $1,500 to $6,500+ |
| Patio sliding door | $1,500 to $6,000 |
| French doors | $2,000 to $7,500 |
| Multi-slide or bi-fold patio door | $5,000 to $22,000 |
| Garage door | $900 to $4,000 |
Pre-hung doors come already mounted in a frame, which makes installation faster and the door more likely to seal well. A slab door is the door alone, fitted into the existing frame; it costs less but only works when the old frame is square and sound.
New doors pay back better than almost any project
Door replacements are among the few home improvements that return more than they cost at sale. The 2025 Cost vs. Value report found:
| Project (US average) | Cost | Added resale value | Cost recouped |
|---|---|---|---|
| Garage door replacement | $4,672 | $12,507 | 268% |
| Entry door replacement, steel | $2,435 | $5,270 | 216% |
The reason is curb appeal. The front door and garage door are the first things buyers see, and a worn door makes the whole house look older than it is. If you are getting ready to sell, these are two of the best-value projects available.
Signs it's time to replace a door
- Drafts or light around the edges with the door closed
- A door that sticks, drags or won't latch, even after adjusting the hinges
- Rot at the bottom of a wood door or frame
- Cracked or fogged glass panels
- Dents or rust on a steel door, or a damaged lock area after a break-in
- High energy bills with an old, uninsulated door
Energy efficiency and security
A modern fiberglass or insulated steel door with good weatherstripping seals far better than an old wood or hollow door. Glass panels, sidelights and transoms bring in light but insulate less, so double-pane or low-E glass is worth it on exterior doors. For security, a solid core, a quality deadbolt with a reinforced strike plate, and long screws that reach the house framing matter more than the door's looks. Smart locks add keyless entry and can be added to most new doors.
Permits
Replacing a door in the same opening usually doesn't need a permit. Making an opening wider, adding a new door to an exterior wall, or replacing a door that must meet fire-rating rules, such as between a garage and the house, usually does. A licensed installer should know your city's rules.
Garage doors
A new garage door is one of the highest-return projects in any home: the 2025 Cost vs. Value report puts the average garage door replacement at $4,672 and the value it adds at $12,507. Garage doors usually cost about $900 to $4,000 installed, depending on size, material and insulation. Steel doors are the most common; insulated steel doors are quieter and better for attached garages; wood and wood-look composite doors cost more. A new opener, if needed, is a separate cost.
Patio doors compared
- Sliding patio doors are the most affordable and save floor space, since they don't swing.
- French doors swing open on hinges and give a wide, traditional opening, but need clear space in front of them.
- Multi-slide and bi-fold doors open most of a wall to the outside, and cost the most because of their size and the structural header they need.
For any patio door, ask about the threshold height, the glass's energy rating, and whether a structural header has to be added or enlarged.
Standard door sizes
The most common exterior door in US homes is 36 inches wide and 80 inches tall. Interior doors are usually 80 inches tall, with widths such as 28, 30, 32 and 36 inches. Standard sizes cost the least because pre-hung doors are stocked in those dimensions. Custom sizes, taller doors and doors with sidelights or transoms have to be ordered and cost more.
Door security basics
A door is only as strong as its frame and lock. To make an entry door harder to force:
- Use a solid-core wood, steel or fiberglass door, not a hollow-core interior door.
- Install a deadbolt with at least a one-inch throw.
- Reinforce the strike plate and use 3-inch screws that reach the house framing, not just the door jamb.
- Use hinges with screws long enough to reach the framing, or security hinges on outward-swinging doors.
- Choose laminated or tempered glass in doors and sidelights near the lock.
Smart locks add keyless entry and remote control, but they still depend on a strong door and frame to resist force.
What happens on installation day
For a pre-hung entry door, the crew removes the old door and frame, checks the rough opening and sill for rot, sets the new frame plumb and level, shims and fastens it, insulates the gaps, installs the threshold and weatherstripping, then finishes the trim and hardware. Most single entry doors are done in a few hours. Ask the installer to show you that the door closes and latches smoothly and seals evenly all the way around.
How to hire a door installer
- Check the contractor's license and insurance.
- Ask whether the price is for a slab or a pre-hung door, and whether it includes new framing, trim and hardware.
- Get the brand, material, glass and finish in writing.
- Ask how they will seal the threshold and weatherstrip the door.
- Pay in stages for larger patio and multi-slide projects.
Every installer in the GOLDGCP network passes a license check, insurance verification, a background check and reference calls before getting a job, and you pay in milestones as the work gets done.
Frequently asked questions
How much does it cost to replace a front door?
Usually $500 to $2,500 or more installed for a single door, and $1,500 to $6,500 or more for double doors, according to HomeGuide.
How much does entry door installation cost?
Labor alone usually costs $230 to $800 for a standard entry door, on top of the door itself. Custom doors, new framing, sidelights and transoms add to the cost.
How much does an interior door cost to install?
About $120 to $570 installed, depending on whether it is a pre-hung door or a slab fitted into the existing frame.
Does a new front door add value?
Yes. A steel entry door replacement recovers about 216% of its cost at sale, and a garage door replacement about 268%, according to the 2025 Cost vs. Value report.
What is the best material for a front door?
Fiberglass is the best all-round choice for most homes: it insulates well, resists dents and weather, and can look like wood. Steel is cheaper and secure; wood is classic but needs more upkeep.
How much does a patio door cost?
A sliding patio door usually costs $1,500 to $6,000 installed, French doors $2,000 to $7,500, and large multi-slide or bi-fold doors $5,000 to $22,000.
How long does it take to install a door?
A pre-hung interior or entry door usually takes a few hours. Patio doors and doors that need new framing can take a full day or more.
Should I choose a pre-hung or slab door?
A pre-hung door comes mounted in a new frame, so it is easier to install and seals better, which makes it the usual choice for exterior doors and for openings with damaged frames. A slab door costs less and works when the existing frame is square, solid and the right size, which is more common with interior doors.
How we calculate these prices
GOLDGCP starts from national price ranges for each job, taken from published 2026 cost guides and checked against local price guides where they exist. To get a local price, we multiply the national range by the construction cost factor for the metro from the U.S. Army Corps of Engineers Area Cost Factors (US average = 1.00). For ZIP codes outside the 50 largest metros, the calculator uses the state's price level from the Bureau of Economic Analysis Regional Price Parities. Ranges include labor and standard materials but not unusual site conditions, so a written quote after an inspection is always the final price.
Sources
- Front door replacement cost · HomeGuide
- Door installation cost · HomeGuide
- 2025 Cost vs. Value Report · JLC / Zonda
- Area Cost Factors, PAX Newsletter 3.2.1 (2024) · U.S. Army Corps of Engineers
- Regional Price Parities by State · U.S. Bureau of Economic Analysis
About this guide
Written by the GOLDGCP editorial team. Prices come from national cost guides; rules and statistics come from the agencies and reports linked in the text. We update this page when prices or codes change.
